£358.80 (inc. EU VAT)
Orders that include the Slow Motor will be delayed by a week as we await stock.
All kits include a Digislider (75cm, 100cm, 150cm or 200cm), Video, Shoot-Move-Shoot & Stop Motion Controller, Slow (best for Time Lapse) or Fast Motor (best for Video), and a battery to power everything.
The Motors easily slip on with minimal effort enabling a fully motorised dolly slider in seconds.
The VT Controller triggers the camera for a set amount of time and then moves the motor for a set distance; doing this on a repetitive loop. Just plug it into your camera, plug in the motor and the power source and you are ready to go. It will control the Fast Motor 15 seconds to 3 minutes per metre and the Slow Motor at speeds as fast as 4 minutes per metre in continuous mode. In Time Lapse (Shoot-Move-Shoot) Mode you can get 24 hours with the Slow Motor and 2 hours with the Fast Motor at as small as 1mm/0.04in increments.
The Digislider will need to be elevated slightly above the ground for the panning device to be attached so we recommend our Adjustable Feet for stability.
The Adjustable Feet easily attach to the bottom of the rail via 3/8 thumb screws, or to the Digislider Add-On blocks using the rubber feet. The legs are individually adjustable to allow stable shots on uneven surfaces. The rubber feet grip to most surfaces without a problem. Strong, light weight, aluminium support with steel legs.
The Quick Release Mount will enable you to release the motor with one pull, which will allow much quicker motor changes and a faster change over to the hand crank. The Quick Release Motor Mount comes with one motor plate that attaches to the bottom of the motor.
75cm Digislider = 2.75kg
100cm Digislider = 3kg
150cm Digislider = 3.5kg
200cm Digislider = 4kg
(+1kg for both motors and a controller)
Digislider Length = rail length +10cm (e.g. Digislider 100cm total length is 110cm)
available carriage movement is the length -10cm (e.g. Digislider 100cm total available length of movement is 90cm)
Width = 11cm
Depth = 8cm
A sturdy tripod is needed if you want to raise the Digislider higher. Any tripod head capable of holding your camera is fine.
Camera cable types and their supported camera models:Canon N3 Cable
Canon E3 (3/32" TRS) Cable (included)
Nikon 3N/DC2 Cable
Nikon DC1 Cable
Nikon 10-pin/DC0 Cable
Panasonic 4-Pole/RS1 Cable
Sony Alpha S1 Cable
Sony Alpha S2 Cable
Olympus UC1 Cable
Olympus CB1 Cable
Completely tool-less Super light-weight (1.1kg/2.65lbs) Weight Limit of 1.2kg/2.6 lbs (perfect for GH4, A7S & BMPCC) Ready to use straight out the box. Fast... View full product details
120 degree of adjustable automatic panning Motorised for Video, Time Lapse & Stop Motion Smooth real-time motion & Shoot-Move-Shoot Time Lapse & Stop Motion control 3kg... View full product details