All kits include a Digislider (100cm, 150cm or 200cm), Video, Shoot-Move-Shoot & Stop Motion Controller (pictured), Slow (best for Time Lapse) or Fast Motor (best for Video & Time Lapse), and a battery pack to power everything.
The Motors easily slip on with minimal effort enabling a fully motorised dolly slider in seconds.
The VT Controller triggers the camera for a set amount of time and then moves the motor for a set distance; doing this on a repetitive loop. Just plug it into your camera, plug in the motor and the power source and you are ready to go. It will control the Fast Motor 15 seconds to 3 minutes per metre and the Slow Motor at speeds as fast as 4 minutes per metre in continuous mode. In Time Lapse (Shoot-Move-Shoot) Mode you can get 24 hours with the Slow Motor and 2 hours with the Fast Motor.
The VT Controller (continuous, shoot-move-shoot, stop motion motion device) features:
•Real-time video and shoot-move-shoot time lapse
•From 0.04"/1mm to 3.15"/80mm travel between shots
•Plug-in and go
The VT Controller triggers the camera for a set amount of time and then moves the motor for a set distance; doing this on a repetitive loop. Just plug it into your camera, plug in the motor and the power source and you are ready to go.
The Quick Release Mount will enable you to release the motor with one pull, which will allow much quicker motor changes and a faster change over to the hand crank. The Quick Release Motor Mount comes with one motor plate that attaches to the bottom of the motor.
100cm Digislider = 3kg
150cm Digislider = 3.5kg
200cm Digislider = 4kg
(+1kg for both motors and a controller)
Digislider Length = rail length +10cm (e.g. Digislider 100cm total length is 110cm)
available carriage movement is the length -10cm (e.g. Digislider 100cm total available length of movement is 90cm)
Width = 11cm
Depth = 8cm
A sturdy tripod is needed if you want to raise the Digislider higher. Any tripod head capable of holding your camera is fine.
Camera cable types and their supported camera models:Canon N3 Cable
Canon E3 (3/32" TRS) Cable
Nikon 3N/DC2 Cable
Nikon DC1 Cable
Nikon 10-pin/DC0 Cable
Panasonic 4-Pole/RS1 Cable
Sony Alpha S1 Cable
Sony Alpha S2 Cable
Olympus UC1 Cable
Olympus CB1 Cable
This is a Pre-Order which will be dispatched 20th August. Discount only available for Pre-Orders. Sneak peek #Digislider new Carbon Video #Slider with built in... View full product details
Motorize your Glidetrack® HD (not Aero) or igus 16-60 rail for video & short/long exposure Time Lapse Real-time motion & Shoot-Move-Shoot Time Lapse control Perfect for any loads... View full product details