£106.80 (inc. EU VAT)
The Standard kit includes all the above, and the VT Video & Time Lapse Controller.
The VT Controller (continuous and shoot-move-shoot motion device) features:
•Real-time video and shoot-move-shoot time lapse
•Shoot-Move-Shoot Time-lapse from 5 minutes up to 24 hours long per metre
•From 0.04"/1mm to 3.15"/80mm travel between shots
•Shoot-move-shoot mode (for HDR and long exposures)
•Set-up a time lapse in seconds
•Plug-in and go
The VT Controller triggers the camera for a set amount of time and then moves the motor for a set distance; doing this on a repetitive loop. Perfect for long exposures like night time lapse. Just plug it into your camera, plug in the motor and the power source and you are ready to go. It will control the Fast Motor 15 seconds to 3 minutes per metre and the Slow Motor at speeds as fast as 4 minutes per metre in continuous mode. In Time Lapse (Shoot-Move-Shoot) Mode you can get 24 hours with the Slow Motor and 2 hours withe the Fast Motor.
The new Digislider Auto Pan allows for up to 100 degrees of automatic panorama or tracking of your camera as it moves across the slider.
A hand operated quick release adjustable mechanism at each end of the slider alters the amount and direction of pan to focus as close as 25cm/10" to infinite.
The Digislider will need to be elevated slightly above the ground for the panning device to be attached so we recommend our Adjustable Feet.
Assembly is required - Click here for Digislider Assembly Instructions
The Adjustable Feet easily attach to the bottom of the rail via 3/8 thumb screws, or to the Digislider Add-On blocks using the rubber feet. The legs are individually adjustable to allow stable shots on uneven surfaces. The rubber feet grip to most surfaces without a problem. Strong, light weight, aluminium support with steel legs.
The Quick Release Mount will enable you to release the motor with one pull, which will allow much quicker motor changes and a faster change over to the hand crank. The Quick Release Motor Mount comes with one motor plate that attaches to the bottom of the motor.
GLIDETRACK and GT GLIDETRACK are the registered trade marks of Glidetrack (Scotland) Ltd. For the avoidance of doubt, Digislider is in no way affiliated, sponsored, endorsed or connected to or by Glidetrack (Scotland) Ltd and the products on this site are those of Digislider and not Glidetrack (Scotland) Ltd.
A sturdy tripod is needed if you want to raise the Digislider higher. Any tripod head capable of holding your camera is fine.
Camera cable types and their supported camera models:Canon N3 Cable
Canon E3 (3/32" TRS) Cable (included)
Nikon 3N/DC2 Cable
Nikon DC1 Cable
Nikon 10-pin/DC0 Cable
Panasonic 4-Pole/RS1 Cable
Sony Alpha S1 Cable
Sony Alpha S2 Cable
Olympus UC1 Cable
Olympus CB1 Cable
Completely tool-less Super light-weight (1.1kg/2.65lbs) Weight Limit of 1.2kg/2.6 lbs (perfect for GH4, A7S & BMPCC) Ready to use straight out the box. Fast... View full product details
120 degree of adjustable automatic panning Motorised for Video, Time Lapse & Stop Motion Smooth real-time motion & Shoot-Move-Shoot Time Lapse & Stop Motion control 3kg... View full product details