Products

Compatibility with Glidetrack’s Hybrid Carriage – 5% extra

Longer belt – 10% extra per metre

The Digislider can be bought without the IGUS rail if you already own one, or wish to buy one elsewhere. The two components slip on the ends of the WS-16-60 DryLin Rails by IGUS (same as Glidetrack HD rails) and the belt threads through a clip and is attached on the bottom of the carriage.

The Digislider Add-On, when connected to the IGUS rail, is well-suited for small DSLRs to larger cameras with lenses, microphones, and other gear (about 10 kgs of weight in total for easy movement).

The Digislider Belt Drive Add-On (with IGUS Rail and Carriage) uses a 100cm long IGUS solid 16-60 rail with carriage with tripod head mount. It has 5 x 3/8 inch threaded holes for mounting tripods and 12 x 1/4 inch threaded holes for numerous attachments like tripod plates. It enables a smooth and accurate movement via a hand crank (It can also be moved up and down the carriage by hand). It does exclude the Digislider Motors (sold separately) which easily slip on with minimal effort enabling a fully motorised dolly slider in seconds with the Digislider Controller (sold separately).

The Digislider is well-suited for small DSLRs to larger cameras with lenses, microphones, and other gear (about 10 kgs of weight in total for easy movement).

Easily attaches to the bottom of the rail via 3/8 thumb screws. The legs are adjustable to allow stable shots on uneven surfaces. The rubber feet grip to most surfaces without a problem. Strong, light weight, aluminium support with steel legs.

Allows control of the Digislider Motors in both directions from 0-100% power. It has an internal battery compartment for a 9V battery (not included), and has input for external 12V power source that overrides the battery power.

They easily slip on and screws securely to the end of the Digslider.

The Digislider motors, when attached, can operate the Digislider in a horizontal, vertical and upside down/overhead way. The motors are well suited to move small DSLRs to larger cameras with lenses, microphones, and other gear (about 6 kgs/13lbs maximum for horizontal movement and 3,5 kg/7.7 lbs maximum for vertical movement).

Digislider Fast Motor

(for video)

The Digislider Fast Motor is designed for video use and with the Digislider Controller will allow a top speed of 15 seconds per metre, using a 12v external battery, or 20 seconds per metre, using the controllers built-in 9V battery source. Its slowest speed is 1 minute per metre.

Digislider Slow Motor

(for time-lapse photography)

The Digislider Slow Motor is designed for time-lapse photography use and with the Digislider Controller will allow a top speed of 3.75 minutes per metre, using a 12v external battery, or 5 minutes per metre, using the controllers built-in 9V battery source. Its slowest speed is 25 minutes per metre, but with 6V external power, you can get up to 4 hours per metre.

It can also be used with the MX2 controller by Dynamic Perception which will enable:

• Shoot-Move-Shoot (Interleaved)

• Extended run time (up to days between moves)

• From 0.01″/0.25mm to 30.9″/78.5mm travel between shots

• “Simple” mode lets you specify travel in real-time

• Manual Motor Control