All kits include a Digislider (50cm or 100cm), Basic Motor Controller, Slow Motor, remote intervalometer and 8 x AA battery holder.
The Motors easily slip on with minimal effort enabling a fully motorised dolly slider in seconds.
The Motor Controller features:
• Real-Time bi-directional controller with direction switch.
• Reduced high pitch motor noise
• Plug-in and go
The Motor Controller is a real-time continuous motion controller with speed control (with the dial) and direction (with the switch). It will control the Slow Motor for 4 minutes to 1 hour per metre.
75cm Digislider = 3.25kg
100cm Digislider = 3.5kg
150cm Digislider = 4kg
200cm Digislider = 4.5kg
(inc. motor and controller)
Digislider Length = rail length +10cm (e.g. Digislider 100cm total length is 110cm)
available carriage movement is the length -10cm (e.g. Digislider 100cm total available length of movement is 90cm)
Width = 11cm
Depth = 8cm
A sturdy tripod is needed if you want to raise the Digislider higher. Any tripod head capable of holding your camera is fine.
Camera cable types and their supported camera models:Canon N3 Cable
Canon E3 (3/32" TRS) Cable
Nikon 3N/DC2 Cable
Nikon DC1 Cable
Nikon 10-pin/DC0 Cable
Panasonic 4-Pole/RS1 Cable
Sony Alpha S1 Cable
Sony Alpha S2 Cable
Olympus UC1 Cable
Olympus CB1 Cable
We only have a few left. These are refurbished goods as good as new with a full warranty. They are being sold under the VAT... View full product details
Small, light yet extremely powerful Weighs 1500g/3.2 lbs Handles 20kg/44lbs panning and 6kg/13lbs tilting 12000 steps per rotation, 0.03 degrees per step Maximum speed of 10 seconds per full rotation... View full product details