Digislider 2 Axis Auto-Pan Video Time Lapse Camera Slider | SILENT | Auto-loop

Sold Out

A post shared by EMM (@mrcheesycam) on



2 Axis adjustable auto panning (aka parallax) with NEW internal design to increase stability

Motorised for Real-time Video & Shoot-Move-Shoot Time Lapse

Auto-Loop and quick Time-Lapse Set-up

5kg/11lbs Horizontal load (SILENT MOTOR but minimal incline movement)

All kits include a 2 Axis Digislider (80cm or 120cm), Video & Shoot-Move-Shoot Controller (pictured), NEW SILENT Stepper Motor, 6 different camera cables (2 x Nikon, 2 x Canon, Panasonic, Sony - see below for compatible models) and a 12 volt rechargeable battery to power everything.  Everything fits into a padded carry-case included.

Below is a comparison between the old motors and the new virtually silent motors.

 

The VT Controller (continuous, shoot-move-shoot, stop motion motion device) features:

•Real-time video and shoot-move-shoot time lapse
•Auto-loop (ping pong), auto-stop features
•Shoot-move-shoot mode up to 4 days long from 0.04"/1mm to 3.15"/80mm travel per move.
•Quick set-up (select the start & end points, interval, number of photos)
•Plug-in and go

The VT Controller triggers the camera for a set amount of time and then moves the motor for a set distance; doing this on a repetitive loop. Just plug it into your camera, plug in the motor and the power source and you are ready to go.


Digislider auto pan 2 axis camera slider

Easy release/lock for panning


0-120 degree adjustable automatic panning (aka parallax)

Digislider auto pan 2 axis camera slider 120 degree auto panning

Digislider auto pan 2 axis camera slider tripod mount

Multiple points for tripod mounting


Quick release adjustable feet

Digislider 2 Axis Pan Slider Feet

Digislider 2 Axis Pan Slider Carriage Break

Resistance & breaking system

 


Length 80cm 120cm
Dimensions: 840x280x115mm 1240x280x115mm
Continuous speed: 24-49 seconds 38-82 seconds
Maximum available track: 660mm 1060mm
Load-bearing: 5kg 5kg
Weight: 2kg 2.4kg

What you will need: 

Tripod and Head (not included)

A sturdy tripod is needed if you want to raise the Digislider higher. Any tripod head capable of holding your camera is fine.


All Camera cable are provided.  These are the types included and their supported camera models:

Canon N3 Cable
Canon: 10D, 20D,30D, 40D, 50D, 7D, 6D, 1D Mark I-IV, 1Ds Mark I-III, 5D, 5D Mark II-IV

 

Canon E3 (3/32" TRS) Cable
Canon: 60D, 70D, 80D, All the 'Rebels' (500D - 800D etc), T41, T3i, T2i, T1i, Kiss
Pentax: K5, K7, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D
Samsung: GX, 1L, GX 1S, GX-10, GX-20
Contax: 645, N1, NX, N Digital

 

Nikon 3N/DC2 Cable
Nikon: D90, D3100, D5000, D7000-D7500, D600-D850

  

Nikon 10-pin/DC0 Cable
Nikon: D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D300, D700, D800, F90x, F90, F100, F6, F5
Kodak: DCS-14n
Fujifilm: S3 Pro, S5 Pro

 

Panasonic 4-Pole/RS1 Cable
Panasonic: DMC-G1, DMC-GH1, DMC-G2, DMC-GH2, DMC-GH3, DMC-GH4, DMC-GH5, DMC-GF1, DMC-G10,DMC-FZ50 SERIES, DMC-FZ30 SERIES,LC-1,L-1GH-4
Leica: DIGILUX2,DIGILUX3

 

Sony Alpha S2 Cable
Sony: Alpha 7, 7R & 7S, NEX-3NL, A6000-A6500, A58, HX300, RX range I-V, RX10 & RX100N


Related Items